Connect with locating companies in Tigard — send one request and compare quotes.
Request a Locate in Tigard
Pinpointing a pressurised water, irrigation, or gas leak so the repair is one hole instead of the whole run.
In Tigard, Oregon — population 51,253, with buried infrastructure laid down over decades and recorded unevenly — leak detection is how a site gets read before anyone breaks ground. Local construction, telecommunications work drives most of the demand.
Escaping water travels along the pipe bedding and surfaces well away from the break, or drains into a storm line and never shows at grade at all — which is why a wet spot is a poor guide to where to dig. Leak detection traces the line first, then narrows the loss with ground microphones, correlators, hydrophones that couple into the water column at hydrants and valves, or tracer gas where the pipe material damps sound. The output is a marked point on the surface, so the excavation is sized to the repair rather than to the search.
Project-planning data for Tigard, OR — soil, climate, and regulatory factors that shape how locating crews scope work in this market.
Tigard sits in a temperate climate, with winter ground freeze reaching 12 inches — frost changes what ground penetrating radar returns, and it stops paint from bonding, so cold-season work leans on recorded offsets and coordinates. Local ground: Clay, Loam, Sandy loam. Soil conductivity is the variable that decides how much of a locate radar can contribute, because conductive ground absorbs the radar pulse instead of reflecting it. Primary industries — construction, telecommunications — drive steady demand for leak detection across the Washington County area.
Oregon Utility Notification Center (811) requires 2 business days of advance notice before any excavation in Oregon. That notification is free and it is separate from leak detection: it brings out the member facility owners to mark the lines they own, and stops at the meter or the right-of-way. Wait for every member to respond before ground is opened.
Locating is quoted per job rather than off a rate card, because the work is a search and a search scales with the site rather than with the clock. On a Tigard job, the things that move the number are how much ground has to be covered, how many targets are in play, whether there are meters, valves, risers, or panels a transmitter can be clipped to, what the lines are made of, what the local ground (clay, loam, sandy loam) does to the instruments, and whether you need surface marks or a record you keep.
Describe the job once through Utility Hotline. Our team reviews the request, then locating companies covering Tigard and Washington County send you their own quotes, so you are comparing them against the same scope. It is free to request.
Tell us about your project and we’ll send your request to locating companies that handle leak detection in Tigard.
Get Free QuotesCommon questions about private utility locating in Tigard
Finding and marking the buried lines on the owner side of the meter, the ones a one-call ticket does not cover.
Test holes that expose a buried line so its position and depth stop being estimates and become measurements.
Turning a field locate into a permanent CAD, GIS, or coordinate record that outlives the paint.
We also serve these nearby Oregon cities
Oregon Utility Notification Center — Always call 811 before excavation.
