Southeast
Concrete Scanning in Florida
Scan the slab before you core, cut, or drill.
Locating companies offering Concrete Scanning in cities across the Southeast. One short request, competing quotes, no phone call required.
Need Concrete Scanning in Florida? High-frequency ground penetrating radar run across a structure rather than the ground, mapping rebar, post-tension tendons, conduit, and voids inside the concrete. It is done immediately before a penetration so the crew knows where it is safe to cut. Locating companies in our network run this work across the Southeast, from the larger metros out to smaller communities, so wherever your site sits in Florida there is usually a crew within range.
Before any excavation in Florida, place a locate request with Sunshine 811. The ticket is free, it is required by law before digging in most jurisdictions, and it brings the member utilities out to mark the public lines they own, which generally stops at the meter, the pedestal, or the right-of-way. Concrete Scanning covers the other side of that line: the private services past the meter and the runs nobody holds a record for.
Scan before every penetration of a structural element where the reinforcement layout is not known with certainty, and always before any penetration of a post-tensioned slab, no matter what the drawings show. Describe your Florida site once and we send the request to locating companies covering the area. They quote you directly, so you compare real crews on scope, price, and scheduling instead of cold-calling around the state.
What Concrete Scanning finds in Florida
Florida coverage
Concrete Scanning by city in Florida
Pick your city, describe the site once, and we send your request to locating companies covering that area.
- Concrete Scanning in Jacksonville1,009,833 people · construction and utilities
- Concrete Scanning in Miami487,014 people · construction and utilities
- Concrete Scanning in Tampa414,547 people · construction and utilities
- Concrete Scanning in Orlando334,854 people · construction and utilities
- Concrete Scanning in St. Petersburg257,083 people · construction and utilities
- Concrete Scanning in Hialeah237,069 people · construction and utilities
- Concrete Scanning in Tallahassee201,731 people · construction and utilities
- Concrete Scanning in Fort Lauderdale183,146 people · construction and utilities
- Concrete Scanning in Cape Coral175,229 people · construction and utilities
- Concrete Scanning in Pembroke Pines166,611 people · construction and utilities
- Concrete Scanning in Port Saint Lucie164,603 people · construction and utilities
- Concrete Scanning in Hollywood149,728 people · construction and utilities
- Concrete Scanning in Gainesville145,214 people · construction and utilities
- Concrete Scanning in Miramar137,132 people · construction and utilities
- Concrete Scanning in Coral Springs129,485 people · construction and utilities
- Concrete Scanning in West Palm Beach120,932 people · construction and utilities
- Concrete Scanning in Palm Bay119,760 people · construction and utilities
- Concrete Scanning in Clearwater117,292 people · construction and utilities
- Concrete Scanning in Miami Gardens113,187 people · construction and utilities
- Concrete Scanning in Pompano Beach107,762 people · construction and utilities
- Concrete Scanning in Lakeland104,401 people · construction and utilities
- Concrete Scanning in Brandon103,483 people · construction and utilities
- Concrete Scanning in Davie100,882 people · construction and utilities
Questions
Concrete Scanning in Florida FAQ
What happens if a core drill cuts a post-tension cable?
A stressed tendon holds tens of thousands of pounds of force, and cutting one releases that energy violently at the point of the cut and at the anchor, which can injure anyone nearby. With unbonded monostrand, the loss runs the full length of the tendon, so the slab loses the precompression that strand provided across the whole span rather than just at the hole; with grouted, bonded tendons the force redevelops through bond over a transfer length and the damage is more localized. Either way the repair is specialty post-tensioning work with an engineer involved, and the opening usually cannot be used until it is resolved. That single outcome is why scanning is standard practice on any post-tensioned structure.
Can concrete scanning tell a post-tension tendon from rebar?
Not from the reflection alone, because both are steel and both return a strong signal. The identification comes from the pattern: tendons drape through a span so their depth changes along the run, they are usually continuous from edge to edge in banded or distributed layouts, and they terminate at stressing anchors along the slab perimeter, while reinforcing bar sits at a fairly constant cover in a regular grid. A technician reads those cues together with the slab type and any available drawings, and where the answer is genuinely ambiguous the honest response is to treat the target as a tendon and move the penetration rather than guess.
How much does Concrete Scanning cost in Florida?
Private locating is quoted per job rather than off a published rate. What moves the number is how much ground has to be covered, how many utilities are in play, whether the lines are metallic or plastic, how reachable the meters, valves, and tracer wire access points are, and whether you need surface marks only or a drawing and GPS data as well. Across Florida the number also moves with ground conditions and travel distance to the site, so companies quote the specific job rather than a rate card. Describe it once through Utility Hotline and locating companies offering Concrete Scanning in that part of Florida send you their own quotes.
Do I need to call before digging in Florida?
Yes. Excavation in Florida calls for a one-call ticket with Sunshine 811 (811) before the ground is opened. It is free, it is required by law before excavation in most jurisdictions, and its members mark the public lines they own, which in practice stops at the meter or the right-of-way. That leaves the private side unmarked: services past the meter, unrecorded runs, and abandoned lines still in the ground. Concrete Scanning is one of the ways that side gets covered, and it works alongside the one-call ticket rather than in place of it.
Where in Florida can I hire Concrete Scanning?
Coverage is settled one request at a time rather than off a published service-area map. Requests come in from cities across Florida, spanning the Southeast, and each one goes to the companies offering Concrete Scanning on that ground. Coverage runs deeper around the larger metros, and some crews travel for rural and multi-site work, so a remote site is worth submitting rather than assuming nobody serves it. Tell us the job site and the replies tell you who does.